USA 800.959.5050  Direct 801.298.5900|
The leader in customized protection solutions
ZERO MODULAR CONTAINERS are custom engineered to meet your needs. Modular Containers are made from light-weight aluminum and make exceptional reusable shipping and storage containers. One of the major economies to be gained in specifying aluminum Modular Containers is that they are "reusable". Your first cost is your last cost when you choose these rugged shipping and storage containers. Not only does the unique construction hold weight down to a minimum, but the Modular Container also has a high strength-to-weight ratio for maximum protection at minimum transport cost. It can pay for itself in transportation savings alone.
Unit of Measure


  • Durability allows the container to be used for multiple shipments. Aluminum Modular Containers are "Reusable".
  • No tools are needed to assemble or open Modular Containers.
  • Handle manually, by crane, hoist or fork lift truck for stacking.
  • Maximum shock isolation and environmental protection.
  • High strength-to-weight ratio for maximum protection at minimum transportation costs.
  • Completely customizable - construct in any size and configuration.
  • Modular containers are designed and made to order.
  • Hardware items may be different and/or custom solution from container to container design.

Made In



N/A A = 0.063" Sheet Aluminum B = 0.090" Sheet Aluminum

Standard Availability

N/A 8 Weeks


N/A Modular
Inside Case Height H1 N/A S = Indicate Bottom Shell Height Only S = Indicate Top Shell Height Only (Minimum 6.50 in) T, P, or D = Indicate Overall Interior Height T, P, or D = XXX

Case Style

N/A D = Double Ended P = Pallet and Shroud S = Split T = Top Opening

Finish (Custom)

N/A See below for Standard Finishes. Custom colors and finishes available upon request. Any commercial or military specification can be met in our completely equipped and staffed paint facility. In addition to supplying any color per FED-STD-595, ZERO has coded swatches to match any color.

Panel Fabrication Customization

N/A Custom Fabrication Silk Screen

Case Customization

N/A Decals/Labels Designation Printing Silk Screen Stenciling

Additional Information

N/A Aluminum Container Benefits
  • Extended Life Equals LOWER Life Cycle Costs
  • Won’t “Loosen Up” Like Screwed or Nailed Wooden Crates do with Handling
  • Not Susceptible to Splintering, which can be a Human Hazard
  • Fully Gasketed and WEATHER Tight
  • Will Not Absorb Jet Fuel, Oil, Solvents
  • Not Susceptible to Aging and Cracking
  • No Materials to Support Fungal Growth
  • Will Not Absorb Water
  • Not a Combustible Material
  • Seals Last for Five Years
  • Not Susceptible to Insects
  • Unmanned Aerial Vehicles (UAV)
  • Aircraft Engines, Wheel & Brakes
  • Secured Inventory Systems
  • Industrial Storage
  • Missile Transport & Storage
  • Deploying Robots
  • Fragile Electronic Equipment
  • Vibration Sensitive Equipment
  • Available in Any Size and Configuration
  • Meets Applicable Provisions of MIL-C-4150, MIL-PRF-28800, MIL-STD-108, and MIL-STD-810
  • Stackable to 3 Containers High
  • High Strength to Weight Ratio Affords Lower Transit Costs
  • ASTM D 4169 Distribution Cycle DC 18 is Feasible
Internal Mounting Features
  • Shock Isolation Plates
  • Wide Selection of Foam Material
  • Saddle Mounting
  • Stabilization Fixtures/Supports
Standard load weight limit on lower stacked container is 800 lbs. Consult ZERO's Engineering and Design for stacked loads exceeding 800 lbs.

Standard Container Features

  • Panel Stiffeners (as required)
  • ZP20137 Handles
  • Continuous Neoprene Seal
  • Designed to be Watertight at a Pressure Differential 0.4 psig
  • ZSP 6-037-1 Automatic Pressure Relief Valve
  • ZSP 2-2001 Latches on 0.063 Sheet Aluminum Containers to Maintain Waterproof Seal
  • ZSP 2-216 Latches on 0.09 Sheet Aluminum Containers to Maintain Waterproof Seal
  • Proper Placement and Location of Optional Accessories

Finish - Standard & Mil-Spec

N/A A = No Finish. B = Wash Prime and Epoxy Primer. C = Same as B Plus Paint Light Gray Semi-Gloss Polyurethane Color #26307 of FED-STD-595. D = Same as B Plus Paint Light Gray Semi-Gloss Polyurethane Color #16307 of FED-STD-595. E = Wash Prime per DOD-P-15328 and Epoxy Primer per MIL-DTL-53022, Paint Polyurethane Yellow Gloss Color #13538 of FED-STD-595. F = Same as B Plus Paint Strata Blue Gloss Polyurethane Color #15045 of FED-STD-595. G = Same as B Plus Paint Green Semi-Gloss Polyurethane Color #24300 of FED-STD-595. H = Same as B Plus Paint Olive Drab Semi-Gloss Polyurethane Color #24084 of FED-STD-595 J = Same as B Plus Paint Olive Drab Lusterless Polyurethane Color #34088 of FED-STD-595. K = Same as B Plus Paint Aliphatic Polyurethane Camouflage Coating (CARC) per MIL-DTL-53039 Color #383 Green, #34094 of FED-STD-595. S = Special Order - Please Specify. UA = Chemical Film per MIL-DTL-5541. W = Chemical Film per MIL-DTL-5541. Epoxy Primer per MIL-DTL-53022, or Water-base Epoxy Primer per MIL-DTL-53030. Paint with White Polyurethane Coating per MIL-PRF-85285, Color #17925 of FED-STD-595 or Epoxy Coating Per MIL-PRF-22750.


  • R1 Humidity Indicator
  • R2 Hoisting Grapple (set of 4)
  • R3 Skid Rails
  • R4 Fork Lift Guides
  • R5 Document Holder
  • R6 Desiccant Holder
  • 1 Specify in 1/4 in Increments