Request Quote
  • The Valuline Series provides a variety of features and options in selecting a case
  • Constructed of deep drawn aluminum shells, the case shells are seamless
  • Three closure options
  • Variations of internal panel mounting, give added versatility in the packaging of electronic, electro - mechanical, or instrumentation equipment
  • Custom sizes - You may design a case from the standard sizes of deep drawn enclosures in the Deep Drawn Catalog
  • All listed sizes can be utilized without a tooling charge
Unit of Measure

Standard Features

 N/A
  • Material: Aluminum Alloy.
  • Latches: Zamak #7 - Nickel Plated.
  • Hinges: Riveted - nickel plated steel. Separable on all styles.
  • Handle: Black molded plastic with nickel plated hardware.
  • Feet: Integral Dimpled
  • Panels: Aluminum with chemical film finish.
  • Material Thickness 0.090"
  • Tolerances: ± 0.06"

Additional Information

 N/A
  • Spot - welded, pre - drilled panel flange
  • Threaded inserts installed to accept a full - sized panel
  • Includes a chemical film finish panel with basic case
  • Finish: 13 powder coat paint finishes or custom

Series

 N/A Valuline™ ZIC 600 Series

Weight

 N/A 3.30 lb

Made In

 N/A USA

Standard Availability

 N/A Custom: 4 weeks In-Stock: 1 Week

Alloy

 N/A 6061-0

Standard Finish (Inside and Outside Except Hardware and Seal)

 N/A MB Textured Medium Blue Powder Coat, Color No. 25190

Finish (Custom)

 N/A BK - Black 27038 Custom FED-STD-595, RAL, Pantone matching system or special also available. DB - Dark Blue 25045 DS - Desert Sand 20372 FED-STD-595 for Reference FG - Forest Green 24079 GR - Gray 26307 MB - Medium Blue 25190 NG - NATO Green RAL6014 OD - Olive Drab 24097 OR - Orange 21400 RD - Red 21105 WH - White 27925 YW - Yellow 23538

Tolerances (±)

 N/A 0.06 in

Size Panel

 N/A 6.50 x 7.50 in
Outside Width1 N/A 7.00 in
Outside Length2 N/A 8.000 in

Mat. Thickness

 N/A 0.063 in

Dimension C

 N/A 0.250 in

Dimension P

 N/A 6.38 in
Outside H13 N/A 2.50 in
Outside H24 N/A 6.00 in
Inside R15 N/A 0.31 in
Inside R26 N/A 0.31 in

Thickness

 N/A 0.060 in

Dimension S

 N/A 5.38 in
  • 1 The narrowest measurement, looking down on the case
  • 2 The longest measurement, looking down on the case
  • 3 Measured from base to top. The "upper" shell is designated H1
  • 4 Measured from base to top. The "lower" shell is designated H2
  • 5 The radius at the bottom of drawn shells
  • 6 The radius at the sides of drawn shells