Request Quote
  • The Valuline Series provides a variety of features and options in selecting a case
  • Constructed of deep drawn aluminum shells, the case shells are seamless
  • Three closure options
  • Variations of internal panel mounting, give added versatility in the packaging of electronic, electro - mechanical, or instrumentation equipment
  • Custom sizes - You may design a case from the standard sizes of deep drawn enclosures in the Deep Drawn Catalog
  • All listed sizes can be utilized without a tooling charge
Unit of Measure

Standard Features

 N/A
  • Material: Aluminum Alloy.
  • Latches: Zamak #7 - Nickel Plated.
  • Hinges: Riveted - nickel plated steel. Separable on all styles.
  • Handle: Black molded plastic with nickel plated hardware.
  • Feet: Integral Dimpled
  • Panels: Aluminum with chemical film finish.
  • Material Thickness 0.090"
  • Tolerances: ± 0.06"

Additional Information

 N/A
  • Most versatile series of the Valuline™ cases
  • Fully gasketed closure of extruded aluminum, spot - welded to the interior case shell.
  • Permits installation of optional panel support brackets.
  • Permits full size primed panel (order separately).
  • O - ring gasket provides additional environmental protection.

Series

 N/A Valuline™ ZIP 800 Series

Weight

 N/A 5.60 lb

Made In

 N/A USA

Standard Availability

 N/A Custom: 4 weeks In-Stock: 1 Week

Alloy

 N/A 6061-0

Standard Finish (Inside and Outside Except Hardware and Seal)

 N/A MB Textured Medium Blue Powder Coat, Color No. 25190

Finish (Custom)

 N/A BK - Black 27038 Custom FED-STD-595, RAL, Pantone matching system or special also available. DB - Dark Blue 25045 DS - Desert Sand 20372 FED-STD-595 for Reference FG - Forest Green 24079 GR - Gray 26307 MB - Medium Blue 25190 NG - NATO Green RAL6014 OD - Olive Drab 24097 OR - Orange 21400 RD - Red 21105 WH - White 27925 YW - Yellow 23538

Tolerances (±)

 N/A 0.06 in

Front Latch Quantity

 N/A 2 in

Hinges

 N/A 2

Panel Number

 N/A ZP9178 - 40

Standard Mounting Brackets

 N/A 6
Outside Width1 N/A 9.19 in
Outside Length2 N/A 13.25 in

Mat. Thickness

 N/A 0.063 in
Outside H13 N/A 2.50 in
Outside H24 N/A 9.00 in
Inside R15 N/A 0.59 in
Inside R26 N/A 0.59 in

Thickness

 N/A 0.060 in

Case Customization

 N/A Decals/Labels Designation Printing Silk Screen Stenciling

Custom Sizes

 N/A You may design a case from the standard sizes of deep drawn enclosures in the Deep Drawn Catalog.
Hardware to your specifications.
Secondary operations available.

Panel Fabrication

 N/A Custom Fabrication Silk Screen
  • 1 The narrowest measurement, looking down on the case
  • 2 The longest measurement, looking down on the case
  • 3 Measured from base to top. The "upper" shell is designated H1
  • 4 Measured from base to top. The "lower" shell is designated H2
  • 5 The radius at the bottom of drawn shells
  • 6 The radius at the sides of drawn shells